Delphi Academy - Delphi Technologies

Featured resource

Hybrid Vehicles IMI Lv 2 & 3 (HVI)

With modern vehicles now incorporating hybrid technology, it is vital that today's technicians can work safely around the high voltage system. This course will give you the confidence and capability to safely work on vehicles that utilise hybrid systems on both petrol and diesel. This course also covers the replacement of high voltage components safely and effciently. This qualification is designed for the technician who maintains and repairs hybrid vehicles, including the hybrid system itself.

Part resource centre delphi training face to face training

Online Training Courses

All Online Courses

Duration: 18 minutes

Hybrid Electric Vehicle Training Series Technical Training

High Voltage safety and hazards (UK-HV-HAZ)

Duration: 11 minutes

Technical Training

High Voltage 'how to' videos (UK-HV-HTV)

Subtitles are available in: ENGLISH

Duration: 37 minutes

Technical Training

Safely lifting a Hybrid and EV (UK-HV-SAF)

Subtitles are available in: ENGLISH

Duration: 35 minutes

Technical Training

Hybrid and EV technology (UK-HV-TEC)

Subtitles are available in: ENGLISH

Duration: 3 minutes

Technical Training

High Voltage batteries (UK-HV-BAT)

Subtitles are available in: ENGLISH

Duration: 1 hour 30 minutes

Technical Training

12v Batteries and Testing (UK-VE-BAT)

Subtitles are available in: ENGLISH

Duration: 3 hour 40 minutes

Technical Training Vehicle Electronics & Engine Management

Vehicle Networking (UK-VE-CAN)

Subtitles are available in: NONE

Duration: 11 minutes

Hybrid Electric Vehicle Training Series Power Electronics

BorgWarner OE drive modules (UK-HV-BWT)

Subtitles are available in: English

Duration: 23 minutes

Technical Training Diagnostics & Test Equipment Pass-Through Diagnostic

Pass Through (UK-DS-PAS)

Subtitles are available in: ENGLISH

Duration: 1 hour 22 minutes

Technical Training Diagnostics & Test Equipment OBD Diagnostic

DS software training - light (UK-DS-SWL)

Subtitles are available in: ENGLISH

Face-to-Face Training Courses

All Face-to-Face Courses

Part resource centre delphi training face to face training

Duration: 1 days.

Diesel Repair Training Vehicle Electronics & Engine Management

CR Injector Repair Update (CIU)

This course includes the principle of operation of the latest generation of Common Rail injectors, use of new repair tooling and test routines.

Part resource centre delphi training face to face training

Duration: 1 days.

Diesel Repair Training Vehicle Electronics & Engine Management

Electronic Unit Injector Repair Update (EIU)

The course includes the principle of operation of the latest electronic unit injectors, including the use of all new Delphi and Hartridge tooling.

Part resource centre delphi training face to face training

Duration: 1 days.

Diesel Repair Training Vehicle Electronics & Engine Management

Bosch Injector Repair (AMB)

CR injector technology has been at the forefront of diesel for almost 20 years. Due to tight manufacturing tolerances injectors can be susceptible to early failure from a number of external factors as well as component failure. This course will cover the operation and designs of Bosch Solenoid and Piezo injectors. It will cover how to repair and replace internal components and the tooling requirements to do this. Finally it will cover testing the injector delivery, response time and backleak in a non-authorised capacity.

Part resource centre delphi training face to face training

Duration: 1 days.

Diesel Repair Training Diesel Fuel Systems

Denso Injector Repair (AMD)

CR injector technology has been at the forefront of diesel for almost 20 years. Due to tight manufacturing tolerances injectors can be susceptible to early failure from a number of external factors as well as component failure. This course will cover the operation and design of Denso solenoid, Piezo and the newer i-Art injectors. It will cover how to repair and replace internal components and the tooling requirements to do this. Finally it will cover testing the injector delivery, response time, and backleak in a non-authorised capacity.

Part resource centre delphi training face to face training

Duration: 1 days.

Diesel Repair Training Diesel Fuel Systems

VDO / Continental Injector Repair (AMC)

CR injector technology has been at the forefront of diesel for almost 20 years. Due to tight manufacturing tolerances injectors can be susceptible to early failure from a number of external factors as well as component failure. This course will cover the operation, and various designs of VDO injectors in detail. It will cover how to repair and replace internal components and the tooling requirements to do this. Finally it will cover testing the injector delivery, response time and backleak in a non-authorised capacity (note this does not cover PPD injectors).

Part resource centre delphi training face to face training

Duration: 4 days.

Diesel Repair Training Gasoline Fuel Systems

DP200/210/310 Pump Repair (DP2)

As the OE manufacturer, Delphi DP200 series fuel injection pumps are designed to keep on going and going and going. Your customers will expect the same when it comes to repair. Our extensive four-day course will give you the skills and knowledge required to perform a robust and accurate repair. You will learn how to diagnose, test and repair DP200, DP210 and DP310 pumps using authorised test equipment, tooling and technical data.

Part resource centre delphi training face to face training

Duration: 3 days.

Diesel Repair Training Diesel Fuel Systems

DPA Pump Repair (DPA)

The best-selling rotary pump worldwide, DPA has been around for a while. Revolutionary for its time, it set new standards for reliability and power. Consequently, there is still a significant parc of vehicles equipped with both DPA and DPS in the field today. And these will all require expert test and repair. The four-day rotary pump course has been designed to give you the skills to diagnose and repair DPA and DPS rotary pumps. Throughout the course, you will learn how to carry out test procedures to OE standards using the Hartridge AVM test bench and other test equipment.

Part resource centre delphi training face to face training

Duration: 2 days.

Diesel Repair Training Vehicle Electronics & Engine Management

Electronic Unit Pump & Smart Injector Repair (EPS)

A smart injector requires an equally smart repair. That's why you'll want to know everything there is to know about Smart injectors and Electronic Unit Pumps (EUP). As the OE manufacturer, this two day course has been designed to share our expertise with you. Giving you everything you need to perform a precise, yet cost-effective repair. The course will teach you how to diagnose, test and repair the Delphi EUP and Smart series.

Part resource centre delphi training face to face training

Duration: 3 days.

Diesel Repair Training Vehicle Electronics & Engine Management

Electronic Unit Injector Repair (EUI)

At the heart of the world's leading heavy duty diesel engines, you'll find a Delphi Electronic Unit Injector (EUI). Fitted to on and off highway applications, from 9 to 16 litres, including Volvo, Renault, Mack and Nissan, EUI presents a great service opportunity for workshops equipped with the right skills and knowledge. You won't want to miss out! And who better to learn from than the OE manufacturer. This in-depth course will teach you everything you need to know about EUI. On completion you will be able to diagnose and repair faults on the Delphi EUI series of injectors.

Part resource centre delphi training face to face training

Duration: 2 days.

Diesel Repair Training Diesel Fuel Systems

CR Injector Repair (CRI)

With Common Rail injector tolerances being measured in microns, even minute variations can have very big consequences. Just one injector performing out-of-sync will have a big impact on injector performance. The result can mean increased fuel efficiency and emissions, something your customer will not appreciate. Because of this, knowing how to repair Common Rail Injectors to the same exacting standards as new is critical.

Delphi Training Prospectus UK 2020-19

Why train at Delphi?

Lunch included on every full-day course.
Post-training support via our UK technical hotline 02038 161 400.
Anyone is welcome on any course - Delphi courses are open to all.
Every course is made of theory and practical sessions. (50% theory - developing knowledge framework in preparation for practical application, and 50% practical real-world diagnostics featuring common vehicle faults.)
Clear pricing structure.
Credible up-to-date trainers.
Max group size of 6 student to 1 trainer (excluding diesel product repair courses).

Select your Region

Find my part Where to buy